Page 11 - ChoiceDek Installation Guide

Basic HTML Version

Questions? CALL 800.951.5117
Lay a top and bottom 2x4 rail along the edges of the steps
and up next to the post.
Position both 2x4 rails for marking by lying on the steps.
Mark the rails on the inside faces of the two upright posts.
Cut each rail along this mark (line).
Position bottom rail ½-inch above edges of steps
(check local code) support on blocks cut from
scrap material.
Cut ends of two balusters at the same angle as
the top and bottom 2x4 rails and use them as the
post balusters.
To complete stair railing follow
steps #5B through #11